QuestMark
High Performance Urethane (High Gloss) - 1321
As low as
$349.51
Flexible, UV stable, this two component urethane is recommended for use as a topcoat in either a thin-mil or high-build system. QuestMark's High Performance Urethane Topcoat is chemical and abrasion resistant.
Availability:
In stock
Product Number
CM1321
- High gloss.
- Chemical and abrasion resistant, with superior flexibility.
- UV stable.
- Does NOT meet Federal VOC standards; available on a limited basis.
- Recommended for auto service centers, warehouses, computer rooms, laboratories, aircraft hangers, cafeterias, exterior tanks, indoor or outdoor service and chemical exposure areas.
- Two component polyester/aliphatic polyurethane.
- Primer is required. Please use CM1015 (Water Based Epoxy Coating) or CM1144 (High Performance Epoxy Floor Coating).
| Application | Mid Coat, Primer, Top Coat |
|---|---|
| VOC Compliant | Less Than 450 Grams per Liter |
| Light Foot Traffic | 14-24 Hours |
| Primer | Required (Use CM1015 or CM1144) |
| Pot Life at 70 Degrees | 2-5 Hours |
| Recoat Time at 70 Degrees | 4-8 Hours |
| Full Cure (Heavy Traffic) | 3-5 Days |
| Approximate Coverage | 320-500 Sq Ft @ 5-6 Mil Wet |
Technical Information
-
1321 Technical Data Size: (24.15 KB)
-
1321 Directions for Use Size: (379.58 KB)
SDS
-
1321 SDS Size: (135.54 KB)
Have a representative contact me to Book a Demo
Thank You
General Information
A QuestMark representative will contact you shortly to get your demo scheduled